Raising Ride Height

While I had the shocks disassembled to replace the bushes and I had access to the whole unit I decided to try raising the ride height a bit to stop the exhaust grounding.  So I wound them up about 1/2"  (If you remember I could not do that in situ as the whole unit was rotating when I turned the adjuster, now I could hold that in a clamp while turning the adjuster). 

Took her for a short run and the ride height doesn't seem to have made much difference.  There is a spot on the exit from the village that I always avoid as I ground there regardless, so I tried again.   She still grounded, although it was more of a 'kiss' than a violent thump.   Maybe I could try adding another 1/2" to the coils.   We'll see how it goes.